FUEL PUMP ECU INSTALLATION

PROCEDURE


  1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY


    1. Install the fuel pump control ECU to the vehicle body with the 2 bolts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

      Note

      Do not reuse the fuel pump control ECU if it has been dropped or subjected to a severe impact.

    2. Connect the 2 fuel pump control ECU connectors.

    3. A01FOWON01

      Engage the clamp to install the luggage compartment trim side cover LH.

    4. Install the 3 clips (A).

    5. Install a new clip (B).

    6. Install the 2 rope hook assemblies with the 2 bolts.

    7. Engage the 4 claws to close the 2 covers.

  2. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  3. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  5. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

    Click here