Click here

BRAKE MASTER CYLINDER(for RHD) REASSEMBLY

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

  2. Click here

    INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  3. Click here

    INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. A01FL3LC01
      B0065WB Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

    2. Install the 2 master cylinder reservoir grommets to the brake master cylinder assembly.

  4. Click here

    INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Secure the brake master cylinder assembly in a vise.

      Note:

      Place aluminum plates on the vise to prevent damage to the brake master cylinder assembly.

    2. Install the brake master cylinder reservoir assembly to the brake master cylinder assembly.

      Note:

      Do not drop the brake master cylinder reservoir assembly.

  5. Click here

    INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN


    1. A01FMRD

      Using a 5 mm pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir assembly.

    2. Remove the brake master cylinder sub-assembly from the vise.