Click here

BRAKE MASTER CYLINDER(for RHD) DISASSEMBLY

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Secure the brake master cylinder sub-assembly in a vise.

      Note:

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A01FMRD

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

      Note:

      Do not drop the brake master cylinder reservoir assembly.

  2. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Remove the brake master cylinder reservoir assembly from the brake master cylinder assembly.

  3. Click here

    REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. A01FMB8

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder assembly.

    2. Remove the brake master cylinder assembly from the vise.

  4. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  5. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER