Click here

BRAKE BOOSTER(for LHD) ON-VEHICLE INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT BRAKE BOOSTER ASSEMBLY


    1. Airtightness check


      1. A01FNS7C03
        *a Correct
        *b Incorrect
        *c 1st
        *d 2nd
        *e 3rd

        Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.

        If the brake pedal can be depressed nearly to the floor the first time, but on the 2nd and 3rd time cannot be depressed as far, the brake booster assembly is airtight.

      2. Depress the brake pedal while the engine is running, and stop the engine with the brake pedal depressed.

        If there is no change in the brake pedal reserve distance while holding the brake pedal depressed for 30 seconds, the brake booster assembly is airtight.

    2. Operation check


      1. A01FLPS

        Depress the brake pedal several times with the engine switch off and check that there is no change in the brake pedal reserve distance when the brake pedal is depressed.

      2. A01FOU0

        Depress and hold the brake pedal, then start the engine.

        If the brake pedal goes down slightly, operation is normal.