Click here

2UR-GSE LUBRICATION SERVICE DATA

Click here
Click here
Table 1. Oil Pressure
Condition Specified Condition
Idling

70 kPa (0.7 kgf/cm2, 10.2 psi) or higher
2500 rpm

220 kPa (2.2 kgf/cm2, 32 psi) or higher
Table 2. Oil Pressure Switch
Tester Condition Condition Specified Condition
1 - Switch body Idling 10 kΩ or higher
Engine stopped Below 1 Ω
Table 3. Engine Oil Level Sensor
Tester Condition Condition Specified Condition
1 - 2 ON Below 1 Ω
OFF 1 kΩ or higher
Table 4. Oil Pump
Item Condition Specified Condition
Oil pump rotor Standard side clearance 0.030 to 0.090 mm (0.00118 to 0.00354 in.)
Maximum side clearance 0.090 mm (0.00354 in.)
Standard tip clearance 0.060 to 0.160 mm (0.00236 to 0.00630 in.)
Maximum tip clearance 0.160 mm (0.00630 in.)
Standard body clearance 0.250 to 0.325 mm (0.00984 to 0.0128 in.)
Maximum body clearance 0.325 mm (0.0128 in.)
Table 5. Standard Oil Grade
Oil Grade Oil Viscosity (SAE)
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil

  • 5W-30

  • 10W-30
API grade SL, SM or SN multigrade engine oil

  • 15W-40
Table 6. Standard Capacity
Item Standard Condition
Drain and refill with oil filter change 9.3 liters (9.8 US qts, 8.2 Imp. qts)
Drain and refill without oil filter change 8.2 liters (8.7 US qts, 7.2 Imp. qts)
Dry fill 10.8 liters (11.4 US qts, 9.5 Imp. qts)