FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

1. Click here

   REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

   Click here

2. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

3. Click here

   REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

4. Click here

   DISCONNECT VENTILATION HOSE

   Click here

5. Click here

   REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

6. Click here

   REMOVE RADIATOR RESERVE TANK ASSEMBLY

   Click here

7. Click here

   REMOVE V-RIBBED BELT

   Click here

8. Click here

   REMOVE CRANKSHAFT PULLEY

   
   
   1. 

      *a	Hold
      *b	Turn

      Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt until only 2 or 3 threads are screwed into the crankshaft.

      09213-38010

      09330-00021

   2. 

      *a	Hold
      *b	Turn

      Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.

      09950-50013

      09951-05010

      09952-05010

      09953-05010

      09954-05021

      Tip:

      Apply molybdenum grease to the threads and tip of SST (center bolt) prior to use.

9. Click here

   REMOVE CRANKSHAFT TIMING GEAR KEY

   
   
   1. 

      Using a screwdriver, remove the crankshaft timing gear key from the crankshaft groove.

      Tip:

      Tape the screwdriver tip before use.

10. Click here

    REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL

    
    

    1. Using a knife, cut through the lip of the timing gear case or timing chain case oil seal.

    2. 

       *a	Cut Position

       Using a screwdriver, pry out the timing gear case or timing chain case oil seal.

       Note:

       After the removal, check the crankshaft for damage.

       If it is damaged, smooth the surface with 400-grit sandpaper.

       Tip:

       Tape the screwdriver tip before use.