DRIVE BELT REMOVAL

PROCEDURE

1. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

2. Click here

   REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

3. Click here

   DISCONNECT VENTILATION HOSE

   Click here

4. Click here

   REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

5. Click here

   REMOVE RADIATOR RESERVE TANK ASSEMBLY

   Click here

6. Click here

   REMOVE V-RIBBED BELT

   
   
   1. 

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise and remove the V-ribbed belt from the V-ribbed belt tensioner assembly.

      Tip:

      The pulley bolt for the V-ribbed belt tensioner assembly is reverse threaded.

   2. 

      *a	5 mm Bi-hexagon Wrench
      *b	Hole

      Rotate the V-ribbed belt tensioner assembly counterclockwise to align the holes and then insert a 5 mm bi-hexagon wrench to secure the V-ribbed belt tensioner assembly in place.

   3. Remove the V-ribbed belt.