DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE

1. Click here

   INSPECT V-RIBBED BELT

   
   
   1. 

      Check the V-ribbed belt for wear, cracks or other signs of damage.

      Tip:

      If any of the following defects is found, replace the V-ribbed belt.

      
      

      • The V-ribbed belt is cracked.

      • The V-ribbed belt is worn to the extent that the cords are exposed.

      • The V-ribbed belt has chunks missing from the ribs.

   2. 

      *a	Correct
      *b	Incorrect

      Check that the V-ribbed belt fits properly in the ribbed grooves.

      Tip:

      Check by hand to confirm that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.