KNOCK SENSOR REMOVAL

PROCEDURE


  1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH

    Click here

  4. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY

    Click here

  5. REMOVE CASE SEPARATOR


    1. B0067KB

      Disconnect the fuel pressure sensor connector.

    2. B0065RR

      Remove the 4 bolts and case separator.

  6. REMOVE KNOCK CONTROL SENSOR


    1. B006547C01
      *a for Bank 2 Sensor 1
      *b for Bank 2 Sensor 2
      *c for Bank 1 Sensor 1
      *d for Bank 1 Sensor 2
      B00679M Engine Front

      Disconnect the 4 knock control sensor connectors.

    2. Remove the 4 bolts and 4 knock control sensors from the cylinder block sub-assembly.

      Note

      If a knock control sensor has been struck or dropped, replace it.