IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. Click here

   INSTALL SPARK PLUG

   Tip:

   Perform "Inspection After Repair" after replacing a spark plug.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. Install the 8 spark plugs to the cylinder head sub-assembly and cylinder head LH.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

      Note:

      If a spark plug has been struck or dropped, replace it.

      Tip:

      Install the same parts to their original positions.

2. Click here

   INSTALL IGNITION COIL ASSEMBLY

   Tip:

   Perform "Inspection After Repair" after replacing an ignition coil assembly.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. Install the 8 ignition coil assemblies to the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH with the 8 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      If an ignition coil assembly has been struck or dropped, replace it.

      Tip:

      Install the same parts to their original positions.

   2. Connect the 8 ignition coil assembly connectors.

3. Click here

   INSTALL NO. 3 ENGINE ROOM RELAY BLOCK ASSEMBLY (for LHD)

   
   

   1. Install the wire harness clamp bracket with the bolt.

      8.5 N*m

      87 kgf*cm

      75 in.*lbf

   2. Install the No. 3 engine room relay block assembly with the bolt and nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

4. Click here

   INSTALL NO. 3 ENGINE ROOM RELAY BLOCK ASSEMBLY (for RHD)

   
   

   1. Install the wire harness clamp bracket with the bolt.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Install the No. 3 engine room relay block assembly with the bolt and nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

5. Click here

   INSTALL NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY (for LHD)

   
   

   1. Install the wire harness clamp bracket with the bolt.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Engage the wire harness clamp.

   3. Install the No. 1 engine room relay block and No. 1 junction block assembly with the 2 bolts and nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

6. Click here

   INSTALL NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY (for RHD)

   
   

   1. Install the wire harness clamp bracket with the bolt.

      8.5 N*m

      87 kgf*cm

      75 in.*lbf

   2. Engage the wire harness clamp.

   3. Install the No. 1 engine room relay block and No. 1 junction block assembly with the 2 bolts and nut.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

7. Click here

   INSTALL BATTERY TRAY (for LHD)

   
   

   1. Install the battery tray with the 2 bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

8. Click here

   INSTALL BATTERY TRAY (for RHD)

   
   

   1. Install the battery tray with the 2 bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

9. Click here

   INSTALL POWER STEERING ECU ASSEMBLY

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

10. Click here

    INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

12. Click here

    PERFORM INITIALIZATION

    
    

    1. Perform "Inspection After Repair" after replacing an ignition coil assembly and spark plug.

       
       

       • w/ Canister Pump Module:

         Click here

       • w/o Canister Pump Module:

         Click here