IGNITION COIL AND SPARK PLUG REMOVAL

CAUTION / NOTICE / HINT

Note

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  3. REMOVE POWER STEERING ECU ASSEMBLY


  4. REMOVE BATTERY TRAY (for LHD)


    1. B00661H

      Remove the 2 bolts and battery tray.

  5. REMOVE BATTERY TRAY (for RHD)


    1. B0066P9

      Remove the 2 bolts and battery tray.

  6. SEPARATE NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY (for LHD)


    1. B0067UY

      Remove the 2 bolts and nut and separate the No. 1 engine room relay block and No. 1 junction block assembly.

    2. B00683K

      Disengage the wire harness clamp.

    3. Remove the bolt and wire harness clamp bracket.

  7. SEPARATE NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY (for RHD)


    1. B0065N8

      Remove the 2 bolts and nut and separate the No. 1 engine room relay block and No. 1 junction block assembly.

    2. B0067YH

      Disengage the wire harness clamp.

    3. Remove the bolt and wire harness clamp bracket.

  8. SEPARATE NO. 3 ENGINE ROOM RELAY BLOCK ASSEMBLY (for LHD)


    1. B0066CF

      Remove the bolt and nut and separate the No. 3 engine room relay block assembly.

    2. B0065MT

      Remove the bolt and wire harness clamp bracket.

  9. SEPARATE NO. 3 ENGINE ROOM RELAY BLOCK ASSEMBLY (for RHD)


    1. B006573

      Remove the bolt and nut and separate the No. 3 engine room relay block assembly.

    2. B0066RN

      Remove the bolt and wire harness clamp bracket.

  10. REMOVE IGNITION COIL ASSEMBLY


    1. B0065I5

      Disconnect the 8 ignition coil assembly connectors.

    2. Remove the 8 bolts and 8 ignition coil assemblies from the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH.

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.

  11. REMOVE SPARK PLUG

    B00683U

    1. Remove the 8 spark plugs from the cylinder head sub-assembly and cylinder head LH.

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.