ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. B006854

      Disconnect the engine coolant temperature sensor connector.

    2. B0066AM

      Remove the engine coolant temperature sensor from the front water by-pass joint.

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.