MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. Click here

   INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tip:

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      Note:
      

      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

2. Click here

   INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

3. Click here

   CONNECT VENTILATION HOSE

   Click here

4. Click here

   INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

5. Click here

   PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      
      

      • w/ Canister Pump Module:

        Click here

      • w/o Canister Pump Module:

        Click here