Click here

ECM INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      4.5 N*m 46 kgf*cm 40 in.*lbf
  2. Click here

    INSTALL NO. 1 ECM BRACKET


    1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      4.5 N*m 46 kgf*cm 40 in.*lbf
  3. Click here

    INSTALL ECM


    1. Install the ECM to the engine room ECU box with the 2 nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      Note:

      • Install the ECM to the engine room ECU box with the name plate facing the outside of the vehicle.

      • If the ECM has been struck or dropped, replace it.

  4. Click here

    ENGAGE WIRE HARNESS


    1. B0066IZ

      Engage the wire harness to the engine room ECU box.

    2. Engage the wire harness clamp.

    3. Connect the transmission control ECU assembly connector.

    4. Engage the wire harness to the engine room ECU box and connect the 6 ECM connectors.

      Note:

      • When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors and other part.

      • Be sure to securely connect the ECM connectors.

    5. Engage the guide and connect the connector holder to the engine room ECU box.

    6. Engage the claw.

    7. B0067K8N01

      Connect the 2 engine wire harness connectors (B).

    8. Connect the engine wire harness connector (A) as shown in the illustration.

  5. Click here

    INSTALL ENGINE ROOM ECU COVER


    1. Install the engine room ECU cover with the 3 bolts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      Note:

      Make sure that the wire harness does not get caught between the parts.

  6. Click here

    INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  7. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  8. Click here

    PERFORM INITIALIZATION