CYLINDER HEAD COMPONENTS
ILLUSTRATION
| *A | for Bank 1 | *B | w/ Differential Pressure Sensor |
| *1 | EXHAUST VALVE | *2 | EXHAUST VALVE GUIDE BUSH |
| *3 | INTAKE VALVE | *4 | INTAKE VALVE GUIDE BUSH |
| *5 | NO. 1 STRAIGHT SCREW PLUG | *6 | NO. 2 STRAIGHT SCREW PLUG |
| *7 | STUD BOLT | *8 | VALVE ADJUSTING SHIM |
| *9 | VALVE SPRING SEAT | *10 | STRAIGHT PIN |
| *11 | VALVE SPRING RETAINER LOCK | *12 | VALVE SPRING RETAINER |
| *13 | INNER COMPRESSION SPRING | *14 | SCREW PLUG GASKET |
| *15 | INTAKE VALVE STEM OIL SEAL | *16 | EXHAUST VALVE STEM OIL SEAL |
| *17 | CYLINDER HEAD | - | - |
 |
N*m (kgf*cm, ft*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |