REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT LENS AND BODY

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01RLFF

      Connect the connector.

    2. Engage the clamp to install the rear combination light socket and wire sub-assembly.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

    2. A01RIA1C01
      B004PI4 Install in this Direction

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.

  4. INSTALL BACK-UP LIGHT BULB


    1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

    2. A01RJWGC01
      B004PI4 Install in this Direction

      Turn the rear combination light socket and wire sub-assembly with the back-up light bulb as shown in the illustration to connect them as a unit.