REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE BACK-UP LIGHT BULB


    1. A01RHO7C01
      B004PI4 Remove in this Direction

      Turn the rear combination light socket and wire sub-assembly with the back-up light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the back-up light bulb from the rear combination light socket and wire sub-assembly.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01RGZZC01
      B004PI4 Remove in this Direction

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01RLFF

      Disengage the clamp.

    2. Disconnect the connector to remove the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT LENS AND BODY