FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH


    1. B004QLEC08
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Apply auxiliary battery voltage to the fog light assembly LH and check that the light comes on.

      OK
      Tester Connection Specified Condition

      A25-4 (B) - Auxiliary battery positive (+)

      A25-1 (E) - Auxiliary battery negative (-)

      		 Fog light comes on

      A25-2 (DRL) - Auxiliary battery positive (+)

      A25-3 (DRLC) and A25-1 (E) - Auxiliary battery negative (-)

      		 Daytime running light comes on

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH


    1. B004QLEC09
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Apply auxiliary battery voltage to the fog light assembly RH and check that the light comes on.

      OK
      Tester Connection Specified Condition

      A26-4 (B) - Auxiliary battery positive (+)

      A26-1 (E) - Auxiliary battery negative (-)

      		 Fog light comes on

      A26-2 (DRL) - Auxiliary battery positive (+)

      A26-3 (DRLC) and A26-1 (E) - Auxiliary battery negative (-)

      		 Daytime running light comes on

      If the result is not as specified, replace the fog light assembly RH.