HEADLIGHT ASSEMBLY REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

  • If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.

  • Ensure that the headlight assembly is not damaged.

PROCEDURE


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A01RIOB

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Tech Tips

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01RKNX

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A01RJEP

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Tech Tips

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01RLS9

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  3. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    1. A01RJ1Q

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Tech Tips

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01RHH7

      Install the lower headlight protector retainer with the 2 screws.