HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. A01RIXYC01
      B004PI4 Install in this Direction

      Temporarily install the headlight assembly as shown in the illustration.

    2. Install the headlight assembly with the bolt and 3 screws.

      Torque:
      Bolt
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
    3. A01RIHJC01
      *a Connector Lock Lever
      B004PI4 Connect in this Direction

      Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    4. Connect the connector.

    5. Remove the protective tape.

    6. Engage the clip to install the cover.

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here