HIGH MOUNTED STOP LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT CENTER STOP LIGHT ASSEMBLY


    1. B004P75C67
      *a

      Component without harness connected

      (Center Stop Light Set)

      Apply auxiliary battery voltage to the center stop light set and check that the light comes on.

      OK
      Tester Connection Specified Condition

      W1-2 (HMSL) - Auxiliary battery positive (+)

      W1-1 (GND) - Auxiliary battery negative (-)

      		 Center stop light comes on

      If the result is not as specified, replace the center stop light set.