LIGHTING SYSTEM, Diagnostic DTC:B2414

DTC Code DTC Name
B2414 Steering Position Sensor Malfunction

DESCRIPTION

The No. 1 headlight ECU sub-assembly LH receives signals indicating direction and amount the steering wheel is turned from the steering sensor using CAN communication. The No. 1 headlight ECU sub-assembly LH stores DTC B2414.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2414 Steering Position Sensor Malfunction Malfunction in steering sensor

  • Steering sensor

  • No. 1 headlight ECU sub-assembly LH

 -

WIRING DIAGRAM

B004PPXE05
*1 Steering Sensor
*2 No. 1 Headlight ECU Sub-assembly LH
*3 CAN Communication Line

CAUTION / NOTICE / HINT

Note


  • Perform the communication function inspections in Diagnosis System to confirm that there are no CAN communication malfunctions before performing the following procedure.

    Click here

  • If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.

    Click here

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > HL AutoLeveling > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Turn the power switch on (IG).

    2. Check for DTCs.

      Click here


      Body Electrical > HL AutoLeveling > Trouble Codes
      OK
      DTC B2414 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  3. REPLACE STEERING SENSOR


    1. Replace the steering sensor with a new or known good one.

      Click here

    2. Check for DTCs.

      Click here


      Body Electrical > HL AutoLeveling > Trouble Codes
      OK
      DTC B2414 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    END (STEERING SENSOR WAS DEFECTIVE)

    NG

    REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH Click here