LIGHTING SYSTEM SYSTEM DESCRIPTION


  1. AUTOMATIC LIGHT CONTROL SYSTEM


    1. When the light control switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the low beam headlights, clearance lights, taillights and license plate lights.

  2. LIGHT AUTO TURN-OFF SYSTEM (except Driver Door-linked Light Auto Turn-off System)


    1. The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (low beam headlights, high beam headlights, front fog lights, rear fog light*, taillights, clearance lights and license plate lights).

    2. The lights that will turn off will vary according to the position of the light control switch as shown in the table below.

      Switch Condition Outline
      Light control switch in AUTO position While the exterior lights are turned on, this control automatically turns them off when the power switch is turned from on (IG) to off.
      Light control switch in tail or head position

      While the exterior lights are turned on, this control automatically turns off only the low beam headlights, high beam headlights and the front fog lights when the power switch is turned from on (IG) to off.

      Tech Tips

      Taillights, clearance lights, license plate lights and rear fog light* remain on.

      • *: w/ Rear Fog Light

  3. LIGHT AUTO TURN-OFF SYSTEM (for Driver Door-linked Light Auto Turn-off System)


    1. The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, front fog lights, rear fog light*, taillights, clearance lights and license plate lights).

    2. When all of the following conditions are met, the headlights, front fog lights, rear fog light*, taillights, clearance lights and license plate lights turn off:


      • The power switch is turned from on (IG) to off.

      • The headlights, front fog lights, rear fog light*, taillights, clearance lights and license plate lights are on.

      • The driver door is opened.


      • *: w/ Rear Fog Light

  4. LIGHT AUTO TURN-OFF SYSTEM (w/ Delay Function)


    1. The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, front fog lights, taillights, clearance lights and license plate lights).


      • This system has the following functions.

      Function Outline
      Delay Function

      The exterior lights automatically turn off after 30 seconds when all of the following conditions are met:


      • The power switch is turned from on (IG) to off.

      • The low beam headlights are on.

      • All doors are closed after any of the doors are opened.
      Door Control Transmitter-linked Function

      The exterior lights turn off immediately when the delay function is active and the following condition is met:


      • The lock button on the key is pushed after all doors are locked.
      Door Open-linked

      The exterior lights automatically turn off immediately when all of the following conditions are met:


      • The power switch is turned from on (IG) to off.

      • The taillights are on. (The low beam headlights are off.)

      • The driver door is opened.

  5. DAYTIME RUNNING LIGHT SYSTEM


    1. The daytime running light system is designed to automatically illuminate the daytime running lights, during the daytime to make the vehicle more visible to other vehicles.


      • This system is controlled by the main body ECU (multiplex network body ECU).

      • This system is enabled when the following conditions are met:


        • The power switch is on (READY).

        • The light control switch is in the off* or AUTO position (and the taillight are not turned on by the automatic light control system).

          *: w/ Light Control Switch off Position

        • The parking brake switch is off.

  6. FOLLOW ME HOME SYSTEM (w/ Follow Me Home System)


    1. The follow me home system is designed to illuminate the low beam headlights for approximately 30 seconds after the vehicle is parked.


      1. This system is controlled by the main body ECU (multiplex network body ECU).

      2. This system is enabled when the following conditions are met:


        • The power switch is off.

        • The light control switch is in the AUTO or off* position.

        • The light control switch is pulled to flash the headlights once.


        • *: w/ Light Control Switch off Position

  7. LANE CHANGE FLASHER CONTROL


    1. This control is performed by the combination meter assembly (meter circuit plate).

    2. When the headlight dimmer switch assembly (turn signal switch) is moved to the lane change position (it is not necessary to hold the switch) during a lane change, the turn signal light flashes a specified number of times.

    3. While the turn signal lights are flashing after the headlight dimmer switch assembly (turn signal switch) has been moved to the lane change position, the turn signal light turns off if the headlight dimmer switch assembly (turn signal switch) is moved in the opposite direction.