WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01RL04C02
      B004PI4 Install in this Direction

      Install the washer motor and pump assembly as shown in the illustration.

    2. Connect the connector.

    3. Connect the washer hose.

  2. ADD WASHER FLUID


    1. Connect the rear washer hose.

    2. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Temporarily install the front fender liner RH with the 9 clips.

    2. for Rough Road Area Specification Vehicles:


      1. Install the clip.

    3. A01RHCHC01
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips as shown in the illustration.

      Note

      Insert each pin hold clip with the slot aligned vertically. Do not rotate the pin hold clip after inserting it. After installation, confirm that the slot is aligned vertically.

    4. Install the front fender liner RH with the grommet and 8 screws.

  4. INSTALL FRONT WHEEL RH

    Click here