FRONT WIPER RUBBER REPLACEMENT

CAUTION / NOTICE / HINT

Note

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT WIPER BLADE


    1. B004QANC01
      *a Lock Button
      B004PRK Push
      B004PI4 Remove in this Direction

      Push the lock button of the front wiper blade to release the lock.

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Place a piece of cloth between the front wiper arm and windshield glass to avoid damaging the windshield glass.

  2. REMOVE WIPER RUBBER

    Tech Tips

    The wiper rubber can be removed from either end of the front wiper blade.


    1. Gradually slide the wiper rubber until the end of the wiper rubber is aligned with the slits in the front wiper blade as shown in the illustration.

      B004QFAC02
      *a Slit - -
    2. B004PAFC02
      *a Slit
      B004PI4 Remove in this Direction

      Pull the end of the wiper rubber through the slits in the front wiper blade in the direction indicated by the arrow shown in the illustration and remove the wiper rubber.

  3. INSTALL WIPER RUBBER

    Tech Tips

    The wiper rubber can be installed through either end of the front wiper blade.


    1. B004P8IC01
      *a Slit
      B004PI4 Install in this Direction

      Insert the wiper rubber through the slit in the front wiper blade as shown in the illustration.

    2. Gradually slide the wiper rubber until the end of the wiper rubber is aligned with the slits in the front wiper blade as shown in the illustration.

      B004P43C02
      *a Slit - -
    3. B004QL3

      Slide the wiper rubber in the direction indicated by the arrow shown in the illustration to install it.

  4. INSTALL FRONT WIPER BLADE


    1. Insert the protrusion of the front wiper arm into the groove of the front wiper blade in the direction indicated by the arrow (1) shown in the illustration.

      B004PULC01
      *a Protrusion of Front Wiper Arm *b Groove of Front Wiper Blade
      *c Lock Button - -
      B004PI4 Install in this Direction (1) B004OIV Install in this Direction (2)

    2. Slide the front wiper blade in the direction indicated by the arrow (2) shown in the illustration until the lock button locks to install the front wiper blade.

      Note

      Make sure that the lock button locks so that it is installed securely.