WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. Operate the rear washer nozzle and check the position that the washer fluid contacts the back door glass.

      Standard
      Washer fluid contacts the back door glass in the area shown in the illustration.
      B004OHBC02
      *a Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 568.6 mm (1.87 ft.) B 514.3 mm (1.69 ft.)
      C 71.1 mm (2.80 in.) D 61.1 mm (2.41 in.)
      E 35.1 mm (1.38 in.) F 29.0 mm (1.14 in.)
      G 511.4 mm (1.68 ft.) H 571.2 mm (1.87 ft.)

      Tech Tips

      If the result is not as specified, replace the rear washer nozzle.