OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    1. Engage the guide and claw.

    2. Install the outer rear view mirror assembly with the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connector.

    4. Engage the clip.

  2. INSTALL FRONT DOOR PANEL PROTECTOR


    1. Install the front door panel protector.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  5. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

    Click here

  6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  7. INSTALL FRONT ARMREST ASSEMBLY

    Click here

  8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. INSPECT POWER MIRROR CONTROL SYSTEM

    Click here