FUEL LID OPENER MOTOR ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY

   Click here

2. REMOVE REAR NO. 1 FLOOR BOARD

   Click here

3. REMOVE DECK BOARD RETAINER

   Click here

4. REMOVE DECK FLOOR BOX LH (w/o Spare Tire)

   Click here

5. REMOVE REAR DECK FLOOR BOX (w/ Compact Spare Tire)

   Click here

6. REMOVE DECK FLOOR BOX LH (w/ Compact Spare Tire)

   Click here

7. REMOVE DECK FLOOR BOX RH (w/ Full Size Spare Tire)

   Click here

8. REMOVE DECK FLOOR BOX LH (w/ Full Size Spare Tire)

   Click here

9. REMOVE DECK TRIM SERVICE HOLE COVER

   Click here

10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

    Click here

11. REMOVE REAR DECK TRIM COVER

    Click here

12. REMOVE REAR SEAT HEADREST ASSEMBLY

    Click here

13. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

14. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

15. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

16. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

17. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

18. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    
    

    1. Disconnect the rear door opening trim weatherstrip LH.

19. REMOVE REAR UNDER SIDE COVER LH

    Click here

20. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

21. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

22. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)

    Click here

23. REMOVE NO. 1 TONNEAU COVER HOLDER CAP

    Click here

24. REMOVE TONNEAU COVER HOOK A

    Click here

25. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

27. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

    
    

    1. 

       	Turn in this Direction (1)
       	Remove in this Direction (2)

       Turn and remove the fuel filler opening lid lock retainer as indicated by the arrows, in the order shown in the illustration.

28. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY

    
    

    1. 

       Disconnect the connector.

    2. Disengage the 2 claws to remove the fuel lid with motor lock assembly.