OUTER REAR VIEW MIRROR GLASS INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER MIRROR


    1. w/o Blind Spot Monitor System:


      1. Connect the connector.

    2. w/ Blind Spot Monitor System:


      1. B004QZ2C04
        B004PI4 Install in this Direction

        Engage the clamp.

      2. Engage the claw as shown in the illustration.

      3. B004PSX

        Connect the 2 connectors.

    3. B004PEA

      Engage the 4 claws to install the outer mirror.

      Note

      Do not push the outer mirror with excessive force. Doing so may break the mirror surface.