FUEL LID OPENER SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine / Data List.

    5. Read the Data List according to the display on the GTS.


      Powertrain > Engine > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Fuel Filler Opener Fuel lid lock with motor assembly status* OFF or ON

      OFF: Fuel lid lock with motor assembly not operating

      ON: Fuel lid lock with motor assembly operating

      		 -
      Fuel Lid SW Fuel lid opener switch status Close or Open

      Close: Fuel lid opener switch not pushed

      Open: Fuel lid opener switch pushed

      		 -
      Fuel Lid Sensor SW Fuel lid courtesy switch status* Close or Open

      Close: Fuel lid closed

      Open: Fuel lid open

      		 -

      • *: w/ Canister Pump Module

  2. ACTIVE TEST (w/ Canister Pump Module)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Powertrain > Engine > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Activate the Fuel Filler Opener Fuel lid lock with motor assembly OFF or ON -