FRONT DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A01RKNVC01
      *a Alignment Mark
      B004PRK Flange Position

      Align the alignment mark on the front door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip.

      Note


      • Always align the alignment mark with the flange when installing the part. If the alignment mark is not aligned, water ingress may occur.

      • After installation, check that the corners fit correctly.

      Tech Tips


      • Make sure to install the part of the front door opening trim weatherstrip near the alignment mark first.

      • The color of the alignment marks on the front door opening trim weatherstrip LH and front door opening trim weatherstrip RH are different.

        Alignment Mark
        Location Color
        for LH Side Yellow
        for RH Side White

  2. INSTALL COWL SIDE TRIM BOARD

    Click here

  3. INSTALL FRONT DOOR SCUFF PLATE

    Click here