UPPER INSTRUMENT PANEL REASSEMBLY

PROCEDURE


  1. INSTALL INSTRUMENT PANEL CUSHION


    1. Clean the upper instrument panel assembly surface.


      1. Remove the double-sided tape from the upper instrument panel assembly.

      2. Wipe off any tape adhesive residue.

    2. Remove the release paper from a new instrument panel cushion.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A01RJ9JC01
      *a Marking Line

      Align the ends of the instrument panel cushion with the marking lines on the upper instrument panel assembly and install the instrument panel cushion as shown in the illustration.

  2. INSTALL SPARE SWITCH HOLE COVER (for RHD)


    1. A01RKMM

      Engage the 2 claws to install the spare switch hole cover.

  3. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01RLWW

      Engage the 10 clamps to install the No. 2 instrument panel wire.

  4. INSTALL SIDE DEFROSTER NOZZLE RH


    1. A01RL2N

      Engage the 3 claws to install the side defroster nozzle RH.

  5. INSTALL SIDE DEFROSTER NOZZLE ASSEMBLY RH


    1. A01RK1C

      Engage the 2 guides.

    2. Install the side defroster nozzle assembly RH with the 2 screws <A>.

  6. INSTALL SIDE DEFROSTER NOZZLE LH


    1. A01RIUH

      Engage the 3 claws to install the side defroster nozzle LH.

  7. INSTALL SIDE DEFROSTER NOZZLE ASSEMBLY LH


    1. A01RLN7

      Engage the 2 guides.

    2. Install the side defroster nozzle assembly LH with the 2 screws <A>.

  8. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Navigation Antenna)

    Click here

  9. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation Antenna)

    Click here

  10. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

    Click here

  11. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01RLCU

      Engage the 9 guides.

    2. Install the defroster nozzle assembly with the 3 screws <A>.

  12. INSTALL NO. 1 INSTRUMENT PANEL PIN


    1. A01RJ1F

      Install the 4 No. 1 instrument panel pins with the 4 screws <A>.

  13. INSTALL METER MIRROR SUB-ASSEMBLY (w/ Headup Display)

    Click here