CONDENSER COMPONENTS
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *1 | HOOD LOCK ASSEMBLY | *2 | INLET NO. 2 AIR CLEANER |
| *3 | NO. 2 RADIATOR AIR GUIDE | *4 | UPPER RADIATOR SUPPORT SUB-ASSEMBLY |
| *5 | HOOD LOCK CONTROL CABLE ASSEMBLY | *6 | HOOD LOCK NUT CAP |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP grease | - | - |
ILLUSTRATION
| *A | w/o Exhaust Heat Recirculation System | *B | for Type A |
| *C | for Type B | - | - |
| *1 | FRONT BUMPER ENERGY ABSORBER | *2 | FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
| *3 | FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT LH | *4 | FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT RH |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Exhaust Heat Recirculation System | *B | for Type A |
| *C | for Type B | - | - |
| *1 | NO. 1 RADIATOR AIR GUIDE LH | *2 | NO. 1 RADIATOR AIR GUIDE RH |
| *3 | NO. 2 RADIATOR TO SUPPORT SEAL | *4 | NO. 3 RADIATOR TO SUPPORT SEAL |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | w/ Exhaust Heat Recirculation System | - | - |
| *1 | NO. 1 RADIATOR AIR GUIDE LH | *2 | NO. 1 RADIATOR AIR GUIDE RH |
| *3 | NO. 2 RADIATOR TO SUPPORT SEAL | *4 | NO. 3 RADIATOR TO SUPPORT SEAL |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY | *2 | COOLER CONDENSER ASSEMBLY |
| *3 | COOLER DRYER | *4 | DISCHARGE HOSE SUB-ASSEMBLY |
| *5 | O-RING | *6 | CAP |
| *7 | PIPING CLAMP | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 11 or equivalent | - | - |