AIR CONDITIONING SYSTEM, Diagnostic DTC:B1441

DTC Code DTC Name
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side)

DESCRIPTION

The No. 2 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air mix damper to the appropriate position. This adjusts the amount of air passing through the heater core after passing the evaporator and controls the temperature of the output air. The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side) Air mix damper position sensor value does not change even if air conditioning amplifier assembly operates No. 2 air conditioning radiator damper servo sub-assembly
  • No. 2 air conditioning radiator damper servo sub-assembly

  • Air conditioning harness assembly

  • Air conditioning amplifier assembly

  • Air conditioning radiator assembly

Memorized

(30 sec. or more)*


WIRING DIAGRAM


  1. for Dual Type

    B004OY4E25
  2. for Single Type

    B004QKHE07

CAUTION / NOTICE / HINT

Tech Tips


  • Confirm that no mechanical problem is present because this DTC can be output when either a damper link or damper is mechanically locked.

  • When installing the damper servo motor, make sure to install it correctly.

    Click here

PROCEDURE


  1. CONFIRM MODEL


    1. Choose the model to be inspected.

      Result
      Result Proceed to
      for LHD (for Dual Type) A
      for LHD (for Single Type) B
      for RHD (for Dual Type) C
      for RHD (for Single Type) D

    B
    C
    D
    A
  2. CHECK FOR DTC


    1. Check for DTCs.


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      B1441, B1442, B1446 and B1448 are output A
      B1497 is output B
      B1441 is output C

    A
    B
    C
  3. CHECK FOR DTC


    1. Check for DTCs.


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      B1441, B1442 and B1448 are output A
      B1497 is output B
      B1441 is output C

    A
    B
    C
  4. CHECK FOR DTC


    1. Check for DTCs.


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      B1441, B1442, B1443 and B1446 are output A
      B1497 is output B
      B1441 is output C

    A
    B
    C
  5. CHECK FOR DTC


    1. Check for DTCs.


      Body Electrical > Air Conditioner > Trouble Codes
      Result
      Result Proceed to
      B1441, B1442 and B1443 are output A
      B1497 is output B
      B1441 is output C

    A
    B
    C
  6. INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)


    1. Check for a wire harness caught between the links of the motors and dampers.

      OK
      No wire harnesses are caught between the links of the motors and dampers.
      Result
      Proceed to
      OK
      NG

    NG
    OK
  7. INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)


    1. Remove the No. 2 air conditioning radiator damper servo sub-assembly.

      Tech Tips

      Click here

    2. Operate the dampers by hand.

      OK
      The dampers are easily operated by hand.
      Result
      Proceed to
      OK
      NG

    OK
    NG