REAR SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY

    Click here

  2. INSTALL REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY LH (for LH Side)


    1. A01VBIDC01
      B004PRK Bolt (A)
      B004P9H Bolt (B)

      w/o Pretensioner:


      1. Engage the 3 guides and temporarily install the rear 3 point type seat outer belt assembly LH with the 3 bolts.

      2. Uniformly tighten the 3 bolts in the order shown in the illustration to install rear 3 point type seat outer belt assembly LH.

        Torque:
        Bolt (A)
        12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
        Bolt (B)
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      3. Check that the ELR locks.

        Note

        This check should be performed with the rear 3 point type seat outer belt assembly LH installed to the vehicle.


        1. With the rear 3 point type seat outer belt assembly LH installed to the vehicle, check that the belt locks when it is pulled out quickly.

    2. w/ Pretensioner:


      1. A01VBAKC01
        B004PRK Bolt (A)
        B004P9H Bolt (B)

        Engage the 3 guides and temporarily install the rear 3 point type seat outer belt assembly LH with the 3 bolts.

      2. Uniformly tighten the 3 bolts in the order shown in the illustration to install rear 3 point type seat outer belt assembly LH.

        Torque:
        Bolt (A)
        12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
        Bolt (B)
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      3. A01VD17C01
        *a Locking Button
        *b Lock

        Connect the pretensioner connector and lock the locking button as shown in the illustration.

        Note

        Securely lock the locking button.

      4. Check that the ELR locks.

        Note

        This check should be performed with the rear 3 point type seat outer belt assembly LH installed to the vehicle.


        1. With the rear 3 point type seat outer belt assembly LH installed to the vehicle, check that the belt locks when it is pulled out quickly.

    3. A01VD9NC03
      *a Protruding Part

      Install the floor anchor of the rear 3 point type seat outer belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear 3 point type seat outer belt assembly LH to overlap the protruding parts of the floor panel.

  3. INSTALL REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY RH (for RH Side)


    1. w/o Pretensioner:


      1. A01VD8AC01
        B004PRK Bolt (A)
        B004P9H Bolt (B)

        Engage the 3 guides and temporarily install the rear 3 point type seat outer belt assembly RH with the 3 bolts.

      2. Uniformly tighten the 3 bolts in the order shown in the illustration to install rear 3 point type seat outer belt assembly RH.

        Torque:
        Bolt (A)
        12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
        Bolt (B)
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      3. Check that the ELR locks.

        Note

        This check should be performed with the rear 3 point type seat outer belt assembly RH installed to the vehicle.


        1. With the rear 3 point type seat outer belt assembly RH installed to the vehicle, check that the belt locks when it is pulled out quickly.

    2. w/ Pretensioner:


      1. A01VCAEC02
        *a Locking Button
        *b Lock

        Connect the pretensioner connector and lock the locking button as shown in the illustration.

        Note

        Securely lock the locking button.

      2. Engage the clamp.

      3. A01VCK8C03
        B004PRK Bolt (A)
        B004P9H Bolt (B)

        Engage the 3 guides and temporarily install the rear 3 point type seat outer belt assembly RH with the 3 bolts.

      4. Uniformly tighten the 3 bolts in the order shown in the illustration to install rear 3 point type seat outer belt assembly RH.

        Torque:
        Bolt (A)
        12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
        Bolt (B)
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      5. Check that the ELR locks.

        Note

        This check should be performed with the rear 3 point type seat outer belt assembly RH installed to the vehicle.


        1. With the rear 3 point type seat outer belt assembly RH installed to the vehicle, check that the belt locks when it is pulled out quickly.

      6. A01VCK0C03
        *a Protruding Part

        Install the floor anchor of the rear 3 point type seat outer belt assembly RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the rear 3 point type seat outer belt assembly RH to overlap the protruding parts of the floor panel.

  4. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY

    Click here

  5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for LH Side)

    Click here

  7. INSTALL NO. 1 TONNEAU COVER HOLDER CAP

    Click here

  8. INSTALL TONNEAU COVER HOOK A

    Click here

  9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Side)

    Click here

  10. INSTALL REAR SEAT SIDE GARNISH

    Click here

  11. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

    Click here

  12. INSTALL REAR UNDER SIDE COVER

    Click here

  13. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  14. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  15. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  16. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  17. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  18. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)

    Click here

  19. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

    Click here

  20. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

    Click here

  21. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  22. INSTALL REAR DOOR SCUFF PLATE

    Click here

  23. INSTALL REAR DECK TRIM COVER

    Click here

  24. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

    Click here

  25. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  26. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

    for RH Side:

    Click here

  27. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

  28. INSTALL DECK FLOOR BOX RH (w/ Compact Spare Tire)

    for RH Side:

    Click here

  29. INSTALL DECK FLOOR BOX LH (w/ Compact Spare Tire)

    for LH Side:

    Click here

  30. INSTALL REAR DECK FLOOR BOX (w/ Compact Spare Tire)

    Click here

  31. INSTALL DECK FLOOR BOX LH (w/ Full Size Spare Tire)

    for LH Side:

    Click here

  32. INSTALL DECK FLOOR BOX RH (w/ Full Size Spare Tire)

    Click here

  33. INSTALL DECK BOARD RETAINER

    Click here

  34. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

  35. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  36. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  37. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  38. INSPECT SRS WARNING LIGHT

    Click here