REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY RH

    B004PJRC37
    *a

    Component without harness connected

    (Rear Seat Inner Belt Assembly RH)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      M25-5 (RBR+) - M25-4 (RBR-) Rear seat belt RH unfastened Below 1 Ω
      M25-5 (RBR+) - M25-4 (RBR-) Rear seat belt RH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly RH.