REAR SEAT INNER BELT ASSEMBLY(for LH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (FOR LH)


    1. B004PJRC36
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH (for LH))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      M26-5 (LBR+) - M26-4 (LBR-) Rear seat belt LH unfastened Below 1 Ω
      M26-5 (LBR+) - M26-4 (LBR-) Rear seat belt LH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly LH (for LH).

  2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (FOR CENTER)


    1. B004Q1HC01
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH (for Center))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      M27-1 (CBR+) - M27-2 (CBR-) Rear seat center belt unfastened Below 1 Ω
      M27-1 (CBR+) - M27-2 (CBR-) Rear seat center belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly LH (for Center).