LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Lumbar support adjuster assembly is available only on the driver side.

  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEATBACK EDGE PROTECTOR

    Click here

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. A01RIK5C01
      B004PI4 Install in this direction

      Install the lumbar support adjuster assembly to the front seatback frame sub-assembly as shown in the illustration.

    2. A01RKT4

      Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.

    3. A01RL2C

      Engage the clamp.

    4. Connect the lumbar support adjuster assembly connector.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Click here

  6. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL SEAT ADJUSTER COVER CAP LH

    Click here

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  10. INSTALL NO. 1 RECLINING HINGE COVER

    Click here

  11. INSTALL VERTICAL ADJUSTING HANDLE LH

    Click here

  12. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  13. INSTALL FRONT SEAT ASSEMBLY LH

    Click here