REAR SEAT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    Tech Tips

    When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. Engage the 18 claws.

      A01RHIS

      Note

      Be careful not to damage the bench type rear seat cushion cover.

    2. Engage the 19 hooks.

      A01RHCY

      Note

      Be careful not to damage the bench type rear seat cushion cover.

    3. A01RHICC01
      *a Fastener

      Engage the 2 fasteners and hook to install the bench type rear seat cushion cover to the rear seat cushion pad.

      Note

      Be careful not to damage the bench type rear seat cushion cover.

  2. INSTALL CHILD RESTRAINT SEAT GUIDE CUP (w/ Cover)


    1. A01RKEMC01
      B004PI4 Install in this Direction

      Install the child restraint seat guide cup as shown in the illustration.

      Tech Tips

      Use the same procedure for all child restraint seat guide cups.

  3. INSTALL NO. 2 CHILD RESTRAINT SEAT COVER (w/ Cover)


    1. A01RJ6UC01
      B004PI4 Install in this Direction

      Engage the 4 claws to install the No. 2 child restraint seat cover as shown in the illustration.

      Tech Tips

      Use the same procedure for all No. 2 child restraint seat covers.

  4. INSTALL NO. 1 CHILD RESTRAINT SEAT COVER (w/ Cover)


    1. A01RLANC01
      B004PI4 Install in this Direction

      Engage the 2 guides and 2 claws to install the No. 1 child restraint seat cover as shown in the illustration.

      Tech Tips

      Use the same procedure for all No. 1 child restraint seat covers.

  5. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)


    1. A01RHVB

      Install the rear seatback lock assembly LH to the rear seatback frame sub-assembly LH with the 2 bolts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  6. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

    Tech Tips

    When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. A01RHLI

      Engage the 8 claws to install the separate type rear seatback cover to the separate type rear seatback pad LH.

      Note

      Be careful not to damage the separate type rear seatback cover.

  7. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. A01RLSCC01
      B004PI4 Install in this Direction

      Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH as shown in the illustration.

    2. A01RHO6C01
      B004PI4 Install in this Direction

      Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

    3. A01RJE4C01
      B004PI4 Install in this Direction

      for Type A:


      1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

    4. A01RHO6C01
      B004PI4 Install in this Direction

      for Type B:


      1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

  8. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)


    1. A01RJO5

      Engage the 2 guides.

    2. Engage the 5 claws to install the rear seatback board sub-assembly LH.

    3. A01RK8RC01
      *a Fastener

      Close the 2 fasteners as shown in the illustration.

    4. A01RKXR

      Engage the hook.

  9. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for LH Side)


    1. A01RIU7

      Engage the 4 claws to install a new rear seatback lock control bezel.

  10. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)


    1. A01RKRV

      Install the rear seatback lock assembly RH to the rear seatback frame sub-assembly RH with the 2 bolts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  11. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

    Click here

  12. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

    Tech Tips

    When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. A01RHWZ

      Engage the 8 claws to install the separate type rear seatback cover to the separate type rear seatback pad RH.

      Note

      Be careful not to damage the separate type rear seatback cover.

  13. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)


    1. A01RKO8C01
      B004PI4 Install in this Direction

      Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH as shown in the illustration.

    2. A01RLAJC01
      B004PI4 Install in this Direction

      for RH Side:


      1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

    3. for RH Side:


      1. A01RL4LC01
        B004PI4 Install in this Direction

        for Type A:


        1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

      2. A01RLAJC01
        B004PI4 Install in this Direction

        for Type B:


        1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

    4. A01RLHVC01
      B004PI4 Install in this Direction

      for Center:


      1. Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

    5. A01RKS1

      Engage the hook to install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.

  14. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)


    1. A01RIFY

      Engage the 2 guides.

    2. Engage the 9 claws to install the rear seatback board sub-assembly RH.

    3. A01RIMFC01
      *a Fastener

      Close the 2 fasteners as shown in the illustration.

    4. A01RHJV

      Engage the hook.

  15. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for RH Side)


    1. A01RJ69

      Engage the 4 claws to install a new rear seatback lock control bezel.

  16. INSTALL REAR SEAT SHOULDER BELT COVER (for RH Side)


    1. A01RI3M

      Install the rear seat shoulder belt cover.

  17. INSTALL SEAT BELT ANCHOR COVER CAP (for RH Side)


    1. A01RJMGC01
      B004PI4 Install in this Direction

      Engage the 2 guides to install the seat belt anchor cover cap as shown in the illustration.

    2. A01RHN0

      Engage the 2 guides and 2 claws to connect the rear seat shoulder belt cover with seat belt anchor cover cap.

  18. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)


    1. A01RK5ZC01
      B004PI4 Install in this Direction

      Install the bush as shown in the illustration.

    2. A01RJYI

      Engage the pin as shown in the illustration.

    3. A01RH08

      Engage the guide as shown in the illustration.

    4. A01RL57

      Install the rear seat center armrest assembly with the bolt and washer.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  19. INSTALL CENTER ARMREST HINGE COVER (for RH Side)


    1. A01RHMSC01
      B004PI4 Install in this Direction

      Engage the claw to install the center armrest hinge cover as shown in the illustration.