FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

   
   

   1. Install the front seat airbag assembly with 2 new nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      
      

      • Do not reuse the nuts.

      • Make sure that the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.

   2. Engage the clamp.

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

   for Manual Seat: Click here

   for Power Seat: Click here

3. INSTALL FRONT SEAT HEADREST SUPPORT

   for Manual Seat: Click here

   for Power Seat: Click here

4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

   for Manual Seat: Click here

   for Power Seat: Click here

5. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)

   for Driver Side: Click here

   for Front Passenger Side: Click here

6. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat)

   Click here

7. INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat)

   for Driver Side: Click here

   for Front Passenger Side: Click here

8. INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat)

   Click here

9. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD (for Power Seat)

   Click here

10. INSTALL SEAT ADJUSTER COVER CAP (for Driver Side Manual Seat)

    Click here

11. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)

    Click here

12. INSTALL NO. 1 RECLINING HINGE COVER (for Manual Seat)

    Click here

13. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side Manual Seat)

    Click here

14. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    for Manual Seat: Click here

    for Power Seat: Click here

15. INSTALL FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

16. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here