COMBINATION METER INSTALLATION

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. Connect the 2 connectors.

    2. Engage the clamp.

    3. Install the combination meter assembly with the 4 screws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Engage the 10 guides and 17 clips to install the instrument cluster finish panel assembly as shown in the illustration.

      A01VBKZC01
      B004PI4 Install in this Direction - -

    2. Engage the 4 guides and 11 clips to install the upper instrument panel assembly as shown in the illustration.

      A01VCRQC01
      B004PI4 Install in this Direction - -

      Note


      • Do not damage the upper instrument panel assembly.

      • Do not allow the wire harnesses to interfere with the surrounding parts.

    3. Install the 2 clips.

  3. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT PILLAR GARNISH LH

    Click here

  8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here