FOOTWELL LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. B004P6MC39
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light LH comes on.

      OK
      Tester Connection Condition Specified Condition

      F5-2 (B) - Auxiliary battery positive (+)

      F5-1 (L) - Auxiliary battery negative (-)

      		 Always No. 1 interior illumination light LH comes on

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. B004P6MC38
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check that the No. 1 interior illumination light RH comes on.

      OK
      Tester Connection Condition Specified Condition

      F4-2 (B) - Auxiliary battery positive (+)

      F4-1 (L) - Auxiliary battery negative (-)

      		 Always No. 1 interior illumination light RH comes on

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.