DOOR COURTESY LIGHT INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY LH


    1. B004P75C63
      *a

      Component without harness connected

      (Courtesy Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check that the courtesy light comes on.

      OK
      Tester Connection Condition Specified Condition

      J5-1 (B) - Auxiliary battery positive (+)

      J5-2 (SW) - Auxiliary battery negative (-)

      		 Always Courtesy light comes on

      If the result is not as specified, replace the bulb or courtesy light assembly LH.

  2. INSPECT COURTESY LIGHT ASSEMBLY RH


    1. B004P75C64
      *a

      Component without harness connected

      (Courtesy Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check that the courtesy light comes on.

      OK
      Tester Connection Condition Specified Condition

      I5-1 (B) - Auxiliary battery positive (+)

      I5-2 (SW) - Auxiliary battery negative (-)

      		 Always Courtesy light comes on

      If the result is not as specified, replace the bulb or courtesy light assembly RH.