GLOVE BOX LIGHT INSPECTION

PROCEDURE


  1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. B004P6MC45
      *a

      Component without harness connected

      (Glove Box Light Assembly)

      Inspect the glove box light.


      1. Apply auxiliary battery voltage to each terminal of glove box light assembly connector and check the operation of the glove box light.

        Result
        Tester Connection Specified Condition

        F11-2 (B) - Auxiliary battery positive (+)

        F11-1 (L) - Auxiliary battery negative (-)

        		 Glove box light comes on

        If the result is not as specified, replace the glove box light assembly.