ROOM LIGHT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    1. A01RH3KC01
      *a Protective Tape
      B004P9H Front

      Using a screwdriver, disengage the 4 claws to remove the No. 1 room light lens.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01RL0HC01
      *a Protective Tape
      B004P9H Front
      B004PI4 Remove in this Direction

      Using a screwdriver, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01RIJGC01
      *1 Room Light Switch Base

      Disengage the clamp.

    4. Using a screwdriver, disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.

  2. REMOVE NO. 1 ROOM LIGHT BULB


    1. Remove the No. 1 room light bulb from the room light switch base.