VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. SEPARATE VANITY LIGHT ASSEMBLY


    1. A01RLWJ

      Using a moulding remover, disengage the claw to separate the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. A01RLCQC01
      B004PI4 Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.

  3. INSTALL VANITY LIGHT BULB


    1. A01RLS0C01
      B004PI4 Install in this Direction

      Install the vanity light bulb to the bulb holder as shown in the illustration.

  4. INSTALL VANITY LIGHT ASSEMBLY


    1. A01RIN0

      Engage the claw to install the vanity light assembly.