VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01RLWJ

      Using a moulding remover, disengage the claw.

    2. A01RH97

      Disengage the 2 claws to remove the vanity light assembly from the bulb holder.

  2. REMOVE VANITY LIGHT BULB


    1. A01RLNWC01
      B004PI4 Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.