ELECTRICAL KEY OSCILLATOR(for Console Box) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the clamp to install the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. INSTALL NO. 1 UPPER BOX PLATE

   Click here