ELECTRICAL KEY OSCILLATOR(for Console Box) REMOVAL

PROCEDURE


  1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 UPPER BOX PLATE

    Click here

  3. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Disconnect the connector.

    2. A01RKRCC01
      B004PI4 Remove in this Direction

      Using a clip remover, disengage the clamp to remove the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.