ELECTRICAL KEY OSCILLATOR(for Rear Floor) REMOVAL

PROCEDURE

1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

   Click here

2. REMOVE REAR SEAT CUSHION ASSEMBLY

   Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

   Click here

4. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Remove in this Direction

      Disconnect the connector.

   2. Using a clip remover, disengage the clamp to remove the No. 2 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.